Próbáljon kulcsszavak, rendelési- vagy termékkód, vagy gyári szám szerint keresni, pl. „CM442” vagy „Műszaki információk”
A keresés elindításához írjon be legalább 2 karaktert.
  • Előzmények
Picture of ultrasonic flowmeter Proline Prosonic Flow 92F for the chemical & petrochemical industry

Proline Prosonic Flow 92F
ultrasonic flowmeter

Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs

92F
Please Wait (spinning wheel)
Ár feltöltés alatt
Az árak ideiglenesen nem érhetők el
Price on request
from CHF ??.-
Mérési feladat/Alkalmazás szűrése
Mérési feladat / Alkalmazás

Konfigurálja a termék CAD-rajzainak letöltéséhez

  • Mérési elv

    Ultrasonic flow

  • Product headline

    Higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.
    Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

  • Sensor features

    Safe design for process industries – international hazardous area approvals. No additional pressure loss – full-bore design. Process transparency – diagnostic capability.
    Full compliance according to NACE MR0175 and MR010. Nominal diameter: DN 25 to 300 (1 to 12"). Medium temperature: –40 to 200 °C (–40 to 392 °F).

  • Transmitter features

    Easy installation and reduced installation costs – loop-powered transmitter. Fully industry compliant – IEC/ATEX/FM/CSA/JPN/NEPSI. Automatic recovery of data for servicing.
    Device as compact or remote version. 2-line backlit display with push buttons. HART, PROFIBUS PA, FOUNDATION Fieldbus.

  • Nominal diameter range

    2 path version: DN80 to 300 (3 to12")
    3 path version: DN25 to 50 (1 to 2")
    4 path version: DN 80 to 300 (3 to 12")

  • Wetted materials

    Sensor:
    A351-CF3M (DN25 to 100)
    1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
    Transducer: 1.4404/316/316L
    Flanges : 1.4404/316/316L or A105/1.0432

  • Measured variables

    Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength

  • Max. measurement error

    Volume flow (standard):
    - ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
    Volume flow (option):
    - ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

  • Measuring range

    0.5 to 10 m/s (1.6 to 33 ft/s)

  • Max. process pressure

    PN 40 / ASME Cl. 300 / JIS 20K

  • Medium temperature range

    -40 to +150 °C (-40 to +302 °F)
    -40 to +200 °C (-40 to +392 °F) optional

  • Ambient temperature range

    -40 to +60 °C (-40 to +140 °F) compact
    -40 to +80 °C (-40 to +176 °F) remote sensor
    -40 to +60 °C (-40 to +140 °F) remote transmitter

  • Transmitter housing material

    AlSi10Mg, coated

  • Degree of protection

    IP67, type 4X enclosure
    IP68 type 6P enclosure (option for remote)

  • Display/Operation

    2 lines backlit display with 3 push buttons

  • Outputs

    1x 4-20 mA HART
    1x Pulse/frequency/switch output (passive)

  • Inputs

    N/A

  • Digital communication

    HART, Profibus PA, FOUNDATION Fieldbus

  • Power supply

    2 wire loop powered

  • Hazardous area approvals

    ATEX,FM, CSA, JPNm UK Ex

  • Other approvals and certificates

    3.1 material (wetted parts), calibration performed on accredited
    calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000
    PED, EAC marking

  • Product safety

    EAC marking

  • Metrological approvals and certificates

    calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

  • Pressure approvals and certificates

    CRN, PED, AD2000

  • Material certificates

    3.1 material (wetted parts)