Turbidity assembly
Cleanfit CUA451

Turbidity assembly
Cleanfit CUA451 ©Endress+Hauser

Retractable assembly for water, wastewater and utilities

Cleanfit CUA451 is a retractable assembly for all fields of turbidity and suspended solids measurements. It is equipped with a stop bolt, O-ring seals and a ball valve, enabling complete separation of process and sensor compartment. This allows you to access the sensor without interrupting the process or emptying the pipe or tank. Better still, benefit from increased process and operational safety and significantly reduced maintenance effort across the whole measuring point.

  • Előnyök

    • One assembly for all applications: The 'one for all' principle optimizes stockholding, speeds up project handling and simplifies life cycle management.

    • Easy and safe maintenance: Sensor service and cleaning without process interruption.

    • Robust design:...

  • Alkalmazási terület

    The Cleanfit CUA451 is a retractable turbidity assembly for:

    • Wastewater treatment plants:
      - Sludge in the recirculation line
      - Sludge centrifuge monitoring
      - Primary sludge and sludge treatment

    • Drinking and process water:
      - Sludge treatment in water...

Tulajdonságok és jellemzők

Vissza

Details

  • Mérési elv

    Single beam scattered light

  • Application

    - Primary sludge and return activated sludge in sewage treatment plants.- Sludge centrifuge monitoring- Filter monitoring and filter backwash- Monitoring of phase break processes.- Cooling water monitoring.

  • Installation

    Manual retractable holder with ball valve for pipe or bypass installations.

  • Characteristic

    - Cleaning possible in every operation mode due to rinse water connection.- Sensor monitoring and calibration without process interrupt.

  • Design

    Manual retractable holder with rinse water connections and external cleaning system. Rinse water connection can be used as sealing water inlet.

  • Material

    Holder : stainless steel 1.4404Sealing : Viton

  • Dimension

    Immersion depth : 170mm or 270mm
    (6.63 - 10.53inch)

  • Process temperature

    max. 80°C (176°F)

  • Process pressure

    For manual assembly operation : max 2bar (29psi)
    Medium pressure : max. 10bar (145psi)

  • Connection

    Process connections : Flange DN50/PN16; ASME 2"/150lbs; G2";Rinse water connections: 2x G1/8; Air supply: 9mm tubing.

Dokumentumok / Kézikönyvek / Szoftver

Tartozékok / alkatrészek

Nr
Order code
Specification