The 11375Z is a cost-effective and reliable solution for conductive point level detection in process or storage tanks for all kinds of liquids.
For conductive point level detection in process or storage tanks, for conductivity as of 0.02mS/cm. As overfill prevention with line monitoring even in Ex-area Zone 0 or as pump protection in pipes and two-point control.
Process connection: Thread
Measuring range: 50 to 2,000mm (1.9 to 78.7")
Temperature: -40 to +200°C (-40 to 392°F)
Pressure: -1 to +50bar (-15 to +725psi )
Components: Transmitter FTW325
International explosion protection certificates, overfill prevention WHG
Előnyök
Long operating life and reliable function without wear since no moving parts in the tank
Cost-effective probe for conductive liquid
Probe can be shortened as required
Cooling adapter for higher fluid temperatures, as of 100°C
Lean választék
Alaptermékek
Megbízható, robusztus és kevés karbantartást igényel
Product root: 11362Z-, 11363Z-, 11375Z-, 11961Z-, S11362Z-, S11363Z-, S11375Z-, S11961Z- Region: Europe (ATEX) Approval agency: TÜV Category: II 1/2 G, II 1 G Protection: Ex ia IIC T6 Ga, Ex ia IIC T6 Ga/Gb
Sütiket használunk a böngészési élmény javítására, statisztikai adatok gyűjtésére a webhely működésének optimalizálása érdekében, valamint személyre szabott hirdetések vagy tartalmak közvetítésére.
Ha az „Összes elfogadása” lehetőségre kattint, Ön hozzájárul a sütik használatához.
További részletekért kérjük, tekintse meg a sütikre (cookie) vonatkozó irányelveinket .